Pg. 3
SETTING UP YOUR QUADCOPTER DRONE:
INSTALL CAMERA
A
LANDING GEAR
PARTS
4 PC
B
PROPELLER CAGES
4 PC
D
USB CHARGING CABLE
1 PC
E
MICROSD CARD/
USB READER
1 PC
C
SPARE PROPELLERS
4 PC
4
GB
F
BATTERY
2 PC
G
POWER BANK &
MICRO USB CABLE
1 PC
1 PC
H
REMOTE CONTROL
1
2
Install the propeller cages onto the corners of
the quadcopter with four part 1 screws.
1. Slide the camera into the designated slot on the battery cover.
2. Open the battery cover.
3. On the underside of the battery cover, secure the camera to the battery cover with two screws
specific to the camera. Then close the battery cover
4. Insert the 3-pin plug from the camera into the designated slot next to the battery cover.
1
2
3
4
1
1
(2)
(1)
(2)
(1)
Install the landing gear onto the bottom of the
quadcopter with the four part 1 screws.
NOTE: the landing gear is numbered and must
be arranged according to the diagram above.
