3 October 2016
# 1050301D 1998.5-2002 Dodge Cummins FlowMAX Lift Pump Kit
(I-00167)
- 11 -
BD Engine Brake Inc.
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295 U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
10.
Thread the JICM adapter (1502033) into the fuel filter bowl and tighten
first. Do not over-torque as this is an o-ring seal. Then thread on the JICF
adapter (1502034) position the barbed end and tighten.
Note the JICM adapter has a loose washer around the oring ensure this does not
fall off the adapter during installation
. The remainder of fuel line is then run from
the fuel filter bowl down to the fuel pump, with one clamp on the filter bowl
adapter assembly and one on the fuel pump fitting, making sure to run the line to
the outlet (OUT) side of the pump. Remove the excess fuel line prior to installing
on outlet and clamping.
1998.5-99
Top of filter housing
2000-02
Rear of filter housing
Fuel Bowl Fitting