3 October 2016
# 1050301D 1998.5-2002 Dodge Cummins FlowMAX Lift Pump Kit
(I-00167)
- 3 -
BD Engine Brake Inc.
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295 U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
1500372
1500392
Flowmax Bracket (box frame)
Mount Strap 20.7”
Qty: 1
Qty: 2
Before You Begin
The FlowMax pump is designed to be a stand-alone pump system and is not
designed to be used in conjunction with stock lift pumps. If your truck has been
retrofitted with the Chrysler in-tank lift pump you will have to lower the fuel tank &
delete the pump from in the tank. BD offers a simple retrofit kit complete with
instructions & the pieces needed to do this, part number 1050302. If you are unsure
if your truck has been retrofitted simply check that the factory lift pump is still in
place on the engine next to the fuel filter housing (see diagram on pages 9 & 10); if it
is not there then your truck has the in-tank pump.
Optional Accessories
1081130
- Low Fuel Pressure LED Alarm kit
1050350
– Water in Fuel Sensor Kit (2000-07)
Required Tools:
5mm Allen wrench
Drill
1/8” and 11/32” Drill bits
Pliers
3/16” Flat Screwdriver
10 mm Socket or wrench
Small Pipe Cutter
Knife To Cut Fuel Hose
9/16” Socket or Wrench
7/16” Socket or Wrench
Installation
1. Disconnect both batteries.
2. Raise the vehicle and support it safely.
3. Unbolt the front driveshaft (4x4 only) for ease of installation.
