3 October 2016
# 1050301D 1998.5-2002 Dodge Cummins FlowMAX Lift Pump Kit
(I-00167)
- 6 -
BD Engine Brake Inc.
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295 U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
Mounting Option 2 - Mounting the Pump Bracket to the Frame
4. From underneath the vehicle
locate the cross member
bracket on the inside of the
driver’s frame rail. Position
and tape drill template (from
the back of this manual) onto
the frame rail just above the
weld. Place fuel pump and
bracket in place to ensure
ample clearance.
Mark holes with center punch.
Remove drill template and
drill pilot holes to 1/8”. Drill
main holes to 21/64”.
5. Insert
the
three
rubber
isolators (1500356) into the
support bracket. Use some
water to aid in lubricating the
isolators as the slide into the
bracket.
Place
the
large
washers
(1500357) on the inside of the
bracket against the rubber
isolator.
Using a air ratchet (9/16”
socket)
tighten
the
self-
threading 3/8” bolt (1500359)
through each hole if the
support bracket assembly and
into the frame. Repeat this
step for the other 2 bolts.
Torque the three bolts to
25ft-lbs
