background image

0000CF04424 Iss. 1    8/18

BOLUS

RATE

SET WITH   

 

                     

80

 ml/h

BOLUS

È

    HOLD KEY BELOW 

QUIT

VOLUME 

             

0

.0ml 

Hands-On Bolus Only

1.  During infusion press the 

i

 button once to display the 

BOLUS MODE

 screen.

2.  Use the 

f

 keys to adjust the bolus rate if 

required.

3.  To deliver the bolus press and hold the flashing 

BOLUS

 

softkey. When the desired bolus volume has been 

delivered or the bolus volume max is reached, release the 

softkey.

If the VTBI is reached during a bolus, a VTBI 

complete alarm or warning will sound. 

RATE

DOSE  100 mg/kg
RATE   100 ml/h

            100 mg/h

BOLUS

SET DOSE WITH  

 

QUIT

BOLUS   100 ml

                0h 00m 45s 

BOLUS

Hands-On and Hands-Free Bolus

1.  During infusion press the 

i

 button once to display the 

BOLUS MODE

 screen.

2.  Press the 

YES

 softkey to go to the 

HANDSFREE

 bolus 

screen or press 

HANDSON

 softkey to go to the HANDSON 

only bolus.

3.  Use the 

f

 keys to adjust the bolus 

DOSE

 if 

required. If necessary press the 

RATE

 softkey to adjust the 

bolus delivery rate.

4.  Press the flashing 

BOLUS

 softkey once to begin the 

delivery of the preset bolus. 

5.  To terminate a bolus being delivered press 

STOP

 softkey. 

This will stop the bolus and continue infusing at the set 
rate. Press the 

h

 button to stop the bolus delivery and 

place the Pump on hold.

NOTE: 

If the bolus volume reaches the set bolus 

volume 

max

 the bolus will stop and the 

Pump

 

will revert to infuse at the set infusion rate.

Bolus Inf

usions

0000CF04424.indd   8

17/09/2019   10:45:05

Summary of Contents for 9003TIG03-G



















Reviews: