BDI CODE 7379 Quick Start Manual Download

Page: 4 / 6

bdiusa.com

customerservice@bdiusa.com

CODE

7379

MEDIA CONSOLE

Step 5 - Stand Up / Attach Door Pulls / Adjust shelves

With help from another person, carefully position the cabinet onto its base. Open the doors and attach the

4 door pulls H5

using

8 wood screws H4

and a

Phillips screwdriver

. The shelves in your Code Media

Console are adjustable. Shelf pins may be unscrewed and moved up or down. Place the 4 ventillated drop-in

panels inplace as shown.

Step 6 - Level your unit

Levelers are integrated into each leg assembly and are accessed at the bottom of each cabinet leg. If your floor

is uneven, you may extend one or more levelers to attain a level, stable cabinet placement. Turning the leveler

clockwise will extend the leveler; turning it counter-clockwise will retract it.

2 Person Task

Phillips

Screwdriver

Ventilated Drop-in

Panels

Shelf Pins

Levelers

Summary of Contents for CODE 7379

Page 2: ...s facing up Orient the 2 end plates A2 as shown with countersunk holes on the outside Attach both end plates A2 to the base rails A1 with flathead screws H1 going through the countersunk holes Tighten screws with hex wrench T1 Step 3 Attach the legs Attach the legs A3 to the base frame using screws H2 and hex wrench T1 T1 H1 x 8 A1 A1 A2 A2 H1 H1 A3 A3 H2 H2 H2 x 8 A2 ...

Page 3: ...ach the base With help from another person carefully position the cabinet on its back Attach the base using screws H3 and hex wrench T1 going through the holes on the base rails and into the threaded holes on the bottom of the cabinet 2 Person Task H3 x 6 T1 H3 H3 H3 H3 H3 H3 ...