User’s Manual
10/73
Ver. [E.1.1]
SSID: nDOSA
Channel: 6
User ID: root
User Password: admin
Wireless Encryption: nESA with Default Key
6. Configuring the computer for sharing the Internet
For sharing the Internet through the DosaLink – 540, the computer should be
configured while the communication between the user’s PC and DosaLink – 540
is normal.
Since LAN IP of the DosaLink – 540 is 192.168.1.1, the user’s PC should have
the following network IP address – 192.168.1.2 ~ 254 – for connecting to the
DosaLink – 540.
There are two ways to assign IP Address to user’s PC. First, the user’s PC
obtains an IP address automatically from the Dosalink – 540 assigned IP address.
Second, the IP address can be assigned by the user. However, a static IP
address should be assigned for operating servers such as Web, FTP, etc.
Configuring the user’s PC may vary depending on the Operating System (OS)
being utilized. This manual is written for users of Windows 2000 and XP.
6.1. Configuration for Windows 2000 and XP
6.1.1. Obtain an IP address automatically for DosaLink – 540
1. “Control Panel” => “Network Connections” => “Local Area Connection” =>
“General” => click “Properties”, and then Figure 4 pops up. In this “Local Area
Connection Properties” window, select “TCP/IP” and click “Properties”.
2. In the “Internet Protocol (TCP/IP) Properties” window, select “obtain an IP
address automatically” and “obtain DNS server address automatically” as
shown in Figure 5. Then, click “OK” to save the configuration.
