User’s Manual
12/73
Ver. [E.1.1]
6.1.2. Confirm and Renew the IP address
The saved configuration information may be confirmed by using the “ipconfig”
command in the DOS window.
1. Select “Start” => “Run” and input “cmd”. Then, click “OK” to execute the DOS
window.
Figure 6 “Run” Window
2. The IP address, Subnet Mask, and Gateway that are assigned automatically
should be confirmed with inputting the command “ipconfig” on the DOS
window. If it is normal, then the IP address should be assigned
“192.168.1.xxx” as shown in Figure 7.
Figure 7 DOS Window (“ipconfig”)
3. If the assigned IP address is outscope of “192.168.1.xxx, then it should be
renewed by “ipconfig /release” and “ipconfig /renew” commands as shown in
Figure 8.
