User’s Manual
22/73
Ver. [E.1.1]
4. Then, move to the “Status” menu and confirm and check the connection status.
Note) “MTU” means the maximum permissible packet size, which the default
value is 1440. This value may vary depending on the Internet Service Provider
(ISP).
Figure 20 Configuration Windows for ADSL Users
9.2. Cable and VDSL Users
1. The same as above, the Automatic connection MODEM users should select
“Cable, VDSL” for “Internet Service Type” in the “WAN Setup” menu as shown in
Figure 21.
2. Since most ISPs confirm the configured MAC address initially, as shown in
Figure 21, press “Clone” and the initial PC’s MAC address is appeared. Then,
click “Submit”.
“Restore” is for reconfiguring the factory default setting of user’s PC.
3. Click “Submit”, and the configuration is applied. Then, the PC will reboot with the
message on web browser.
