User’s Manual
8/73
Ver. [E.1.1]
WAN
Indicates the connection status of Wide Area Network (WAN) Link
•
Off – The physical connection is not completed
•
On – The physical connection is completed
•
Blinking – The packets are sending and receiving with
normal connection
Port1
Port2
LAN
Port3
Indicates the connection status of Local Area Network (LAN) Link
•
Off – The physical connection is not completed
•
On – The physical connection is completed
•
Blinking - The packets are sending and receiving with
normal connection
WLAN
Indicates the connection status of WLAN
•
Off
–
Malfunction
•
On – Normal operation
•
Blinking - The packets are sending and receiving with
normal connection
Table 2 Indications of the Front side LED
Figure 2 DosaLink - 540 Back View
5. Installing the Hardware
5.1. Before Installing
The user’s MODEM should be plugged into the power after configuring the
DosaLink – 540.
In the case of an Automatic connection MODEM among Asymmetric Digital
Subscriber Line (ADSL) MODEM users, “Cable, VDSL” should be selected in the
“WAN Setup” menu on the DosaLink – 540’s configuration window.
The Automatic connection MODEM has built-in “user account” and “password”,
which are required to authenticate the PPPoE, so it may be able to connect to
the Internet without any connection program.
