15
EKF Series 300/500/600
GB
Cleaning/maintenance
WARNING
►
Switch off the machine and discon
-
nect the voltage supply before per-
forming maintenance or cleaning (Pull
the plug out of the mains socket).
►
When using compressed air for
cleaning, wear protective goggles and
gloves and protect other persons in
the working area.
ATTENTION
►
Never immerse the machine in water
or other liquids.
Cleaning
After each use
Remove the swarf.
Clean the tool and the tool and the
machine.
Put the machine and accessories into
the transport case.
Maintenance
WARNING
Danger caused by unqualified repairs!
Unqualified repairs can lead to consid
-
erable danger for the user and cause
damage to the machine.
►
Repairs to electrical appliances may
only be carried out by the works cus-
tomer service or by specialists trained
by the manufacturer.
Checking the milling cutter
Check the milling cutter and the re-
versing plates regularly for wear.
If necessary, turn or replace the
reversing plate as described in section
“Tool change”
.
If the entire milling cutter is worn or defec-
tive:
Replace the milling cutter as described
in section
“Tool change”
.
Replacing the carbon brushes
Replacement of the carbon brushes may
only be carried out by BDS or by an au-
thorised specialist workshop. Unauthorised
repairs will invalidate the guarantee.
Customer service/service
Should you have any questions on custom-
er service/service, please contact BDS.We
will be happy to give you the address of
your nearest service partner.
Cleaning/maintenance
