Safety
MAB 480
8
■
Do not leave the machine unsupervised during operation .
■
Store the machine in a dry, temperate location out of the reach
of children .
■
Do not leave the machine standing outdoors and do not ex
-
pose it to moisture .
■
Make sure that your work area is sufficiently lit (>300 Lux).
■
Do not use low power machines for heavy working .
■
Make sure that your workplace is clean .
■
Keep the machine clean, dry and free of oil and grease .
■
Follow the instructions on lubricating and cooling the tool .
Electric shock hazard
DANGER
Danger to life by electric shock!
Contact with live wires or components could lead to seri-
ous injury or even death!
Observe the following safety precautions to avoid electric
shocks:
►
Do not open the housing of the machine . Risk of electric
shock if live terminals are touched .
►
Never immerse the machine or the plug into water or other
liquids .
►
Use only extension leads or cable drums with a cable cross-
section of 1 .5 mm² .
►
Only use extension leads that are approved for the place of
work .
►
Check the condition of the extension lead regularly and
replace if damaged .
►
Avoid direct body contact with grounded parts (e .g ., tubes,
radiators, steel girders) to reduce the risk of electric shock in
the event of a defect .
►
When using the machine outside or in a humid environment,
an RCD (residual circuit device) must be used .
