22
Know Controls & Features
Page 19
Know Controls and Features
NOTE:
This Operator’s Manual covers several models. Log splitter features may vary by model. Not all features in this
manual are applicable to all log splitter models and the log splitter depicted may differ from yours.
Beam Lock
The horizontal beam lock, as its name suggests, is used
to secure the beam in the horizontal position. The
horizontal beam lock is located on the beam support
latch bracket.
Log Dislodger
The log dislodgers are designed to remove any
partially split wood from the wedge. This may occur
while splitting large diameter wood or freshly cut
wood.
Engine Controls
See the Engine Operator’s Manual for the location and
function of the controls on the engine.
Log Tray
The log trays are designed to catch the log after it is
split.
Control Handle
The control handle has three positions; Forward, Neutral
and Reverse. See the Operation section for instructions
Tongue
The tongue is used to attach to a towing vehicle for
transportation.
.
Splitting Wedge
The wedge is used to split the wood.
End Plate
The end plate holds the log in place while the wedge
splits the log.
(FIGURE15)
Cylinder
Tongue
Flip-down
Stand
Log Tray
End Plate
Horizontal
Beam Lock
Splitting Wedge
Control Handle
Log Dislodger
Page 22
NOTE:
This Operator’s Manual covers several models. Log splitter features may vary by model. Not all features in this
manual are applicable to all log splitter models and the log splitter depicted may differ from yours.
Beam Lock
The horizontal beam lock, as its name suggests, is used to
secure the beam in the horizontal position. The horizontal
beam lock is located on the beam support latch bracket.
Engine Controls
See the Engine Operator’s Manual for the location and
function of the controls on the engine.
Control Handle
The control handle has three positions; Forward, Neutral
and Reverse. See the Operation section for instructions.
Splitting Wedge
The wedge is used to split the wood.
Log Dislodger
The log dislodgers are designed to remove any
partially split wood from the wedge. This may occur
while splitting large diameter wood or freshly cut wood.
Log Tray
The log trays are designed to catch the log after it is
split.
Tongue
The tongue is used to attach to a towing vehicle for
transportation.
End Plate
The end plate holds the log in place while the wedge
splits the log.
