Page 9
Step 2:
Remove all loose parts included in the container, e.g. operator’s manual, wheels, hardware box and engine box.
Step 3:
Use scissors or a knife to cut
and remove
the straps securing the parts to the beam or tank assembly, including
fenders, tongue assembly, log tray & log dislodger assemblies, then put aside these parts for assembly.
NOTE:
DO NOT
remove the strap securing the hydraulic hoses assemblies to the beam at this time, until you do the
assembly procedure of the hoses.
Step 4:
Use a pry bar or claw hammer to remove the plywood splinters securing the beam and tank assemblies on the
crate bottom. Take out the two assemblies.
Step 5:
Inspect all component assemblies, parts and accessories according to the packing list attached in this manual
(Page 36). Make sure all items listed in the packing list are included, and of no shipping damage
.
If any parts are damaged or missing, please call the authorized service dealer for assistance.
NOTE:
DO NOT
discard the packing materials until you have carefully inspected and satisfactorily operated the tool.
Page 12
Summary of Contents for AGRI EASE BE-LS22TL6505GC
Page 2: ......
