BE Ag & Industrial AgriEase BE-WCGF4 Series, Operations & Parts Manual

10     

BE-WCGF4xxx USER MANUAL

SECTION II - ASSEMBLY INSTRUCTIONS

PACKAGING CONTENTS

SKID

PARTS BOX

BOLT BAG

Chipper

Chipper Hopper

4 each – 5/16-18 X 3/4” Carriage Bolts

Hitch Arms

Stand

4 each – 5/16-18 Nylock Nut

Hitch Assembly

Glasses

4 each – 5/16 USS Flatwasher

Parts Box

Owner’s Manual

2 each – 1/2-13 X 3” HHCS

Engine Manual

4 each – 1/2-13 X 1 ¼” HHCS

Bolt Bag

2 each – 1/2-13 Gripco Nut

Wire Harness

1 each – 3/16 Hair Cotter Pin

10 each - 14-1/2” Cable Ties

2 each – Hitch Arm Mounting Plates

Knife Gauge

2 each – Engine Key

Tools required for assembly

• 1/2” Wrench or Socket - 2 required
• 3/4” Wrench or Socket - 2 required

Step 1 – Unpacking and checking contents

• Remove the all items from the crate
• After unpacking the crate, compare the contents with the list above.
• If any parts are missing, please contact the supplier directly.
• Assembly should be done on a clean, level surface. 

WOOD CHIPPER ASSEMBLY

Set the shipping crate on a solid flat surface and carefully remove the lid. Use two people and take all parts 

out of the crate and inspect the components to ensure there are no missing pieces before starting to  

assemble the log splitter follow steps 1 through 3.

Step 1 – Assembling the feeding hopper

• Assemble feeding hopper(#19 ) to disc housing(#6) using for hex bolt M8×25 (#77 ), flat washer 8(#69), 

and lock nut M8(#70 )

• Put the in-feed to frame rubber(#20) between the feeding hopper(#19) to disc housing(#6).