10
BE-LS40TS390 USER MANUAL
Step 5:
Assembly Engine Mounting Plate
Assemble the engine mounting plate (#68) to oil tank (#51), fixed by using hex bolt M10x30 (#41), flat
washer Ø10 (#42) and lock nut M10 (#43).
Step 6:
Mounting H Beam to Tow Bar
1. Remove the hinge pin (#48) and cotter pin Ø4x40 (#49) from tow bar.
2. Attach beam to the tow bar secure with hinge pin (#48) and cotter pin Ø4x40 (#49).
3. Attach hydraulic hose (valve - oil tank) (#101) to the return oil pipe connector of oil tank put a o ring
17x2.5 (#25) in the middle of them.
Step 7:
Assembly Gear Pump
1. Take down the flat key (#97) from the engine shaft, put the engine bushing (#95) to the engine shaft,
insert the flat key (#97) to the engine shaft again, then assemble the engine connector (#94) to the
engine shaft.
2. Assemble the gear pump assembly to the engine by using hex bolt M8x25 (#86), lock washer Ø8 (#87)
and flat washer Ø8 (#4).
3. Assemble the connector cover (#99) to the gear pump stand by using hex bolt M5x10(#98).
68
43
42
41
51
Figure 3-5
101
51
27
25
48 49
65
102
101
51
Figure 3-6
Figure 3-7
