BE-LS40TS390 USER MANUAL
11
Step 8:
Assembly Engine Components
Assemble the engine component (#83) to mounting plate (#68), put polyurethane block (#84) and big flat
washer Ø10 (#85) in between engine and mounting plate. Fixed by hex bolt M10x75 (#45), flat washer Ø10
(#42), nylon lock nut M10 (#43).
Assemble the suction hose (#104) into the connector of gear pump (B1), secure by hose clamp (#103).
Assemble the hydraulic hose (valve-pump) (#102) into the connector of gear pump (C1), by o ring 14x2.5
(#100), then tighten.
Step 9:
Log Cradle and Wood Tray Assembly
1. Assemble the left log cradle (#28) to mounting plate of H beam left side, and assemble the right log
cradle (#40) to mounting plate of H beam right side. Fixed by hex bolt M10 M10x75 (#45), flat washer
Ø10 (#42), nylon lock nut M10 (#43).
2. Assemble the wood tray (#37) to tray frame (#38), fixed by hex bolt M8x35 (#39), flat washer Ø8 (#4),
nylon lock nut M8 (#5).
3. Attach the wood tray assembly to the right log cradle (#40).
TO (C1)
100
102
102
TO (B1)
104
103
(D2)
(D1)
42 43
84
85
(B1)
(C1)
83
91
TO (D1)
TO (D2)
45
Figure 3-8
Figure 3-9
28
39 4 5
40
37
42
41
43
38
