5.
Electric circuit principle diagram
A.
Power cable
B.
Switch
C.
Wiring board
D.
Motor lead wire
E.
Thermal protector
F.
Main winding
G.
Aux. winding
H.
Capacitor
6.
Hydraulic circuit principle diagram
A.
Hydraulic tank
B.
Oil filter
C.
Oil pump
D.
Electric motor
E.
Relief valve
F.
Control handle
G.
Cylinder
SECTION 2: Safe Operating Instructions
NOTE: This machine is only intended for homeowners to split firewood as detailed in instructions, not for any
other purpose.
Danger
This machine was built to be operated according to the safety instructions in this manual. As with
any type of power equipment, carelessness or error on the part of operator could endanger the personal safety
and/or property of yourself and others. It can result in serious injury or death, such as amputating hands or feet,
throwing objects and other unforeseeable damage. Read and follow all instructions before initial operation. The
manufacturer isn’t liable for any damages by disregard of the instructions.
1. Assembling your log splitter
•
This product has been shipped partially assembled. Cut and
remove straps bound to the carton and unpack the carton.
•
Remove the loose parts included with unit (i.e.,
operator’s manual, accessories, etc.).
•
Set the foams aside.
•
Put the machine on a sturdy level surface and assemble the long
frames by two persons.
1)
Put the machine on a sturdy level surface, install the
long front frame tightly (
Fig. 1
)
2)
One person takes care of the machine in case falling down
when another person assemble the frames.
3)
Attach the two long wheel frames, and assemble the
wheel axis. Then install the two wheels. (
Fig. 2
)
4)
Move the machine down by two persons.
7
Note:
The mains connection must have maximum 16A fuse.
Fig. 2
Fig. 2
Fig. 1
