SMART SAFE 3001D-1GL/3GL/5GL
SMART SAFE 3001D 1GL/3GL/5GL
11
UNIVERSAL SOCKET (OPTIONAL)
On request, a universal power socket can be provided. It will be located on the inside of the door of the safe. It
can connect various devices
– for example, a personal computer or a cell phone battery charger – to the
power mains. The power supply cable of this socket comes out from the back of the safe, and ends with three
small cables (phase, neutral and earth) which can be
directly connected to the terminals of the wiring system, or to
a normal plug. In case of direct connection to the wiring
system, the wiring system must be equipped with a
complete line cut off device, with a contact opening distance
of at least 3.5mm. If the power supply cable is connected to
a normal plug, the plug must be perfectly accessible.
NOTICE
If the power supply cable is damaged for any reason
whatsoever, disconnect it from the power supply system
– or
take the plug out of the socket
– and get in touch with our
Sales Service.
SMART SAFE SYSTEM (OPTIONAL)
The system is used to memorize the openings of the smart safe, in a data archive. This system manages the
archive according to the customer code used and the kind of key used. (IB card or mechanical card),
showing the date and time the smart safe was opened.
NOTICE
To install the program, you need the following minimum system requirements:
OS: Windows XP, Windows 2000, Windows 98
Ram memory: 64MB Ram
Processor: Pentium
Ⅲ
