SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
8-11
USER INSTRUCTIONS
Now the smart safe is delivered to the user with the door open and ready to use.
ASSIGNING OWNER CODE
Make sure that the smart safe has been initialized and was open
Press the
*
,
0
and
#
button, input original owner code
123456
, and then press
#
button.
Press the
*
,
0
and
#
button again in 6 seconds, when
1St
display on the screen, input a new owner
code as you like, then press the
#
button
When
2nd
display on the screen, input the same owner code and press
#
button again
When
dOnE
display on the screen, it means owner code was set successful.
Only one owner code is allowed.
CHANGE AN OWNER CODE
Make sure that the smart safe was open.
Press the
*
,
0
and
#
button, input owner code you set before, and then press
#
button.
When
PrOG
display, press the
*
,
0
and
#
button
When
1St
display, input a new code, and then press
#
button
When
2nd
display, input the same code and press the # button again
When
dOnE
display, it means owner code has changed successful
NOTICE
Once the safe initialized, the Owner Code return to factory setting code
123456
.
OPEN THE SAFE BY OWNER CODE
Press the
*
,
0
and
#
button, input the owner code that you set before, and then press
#
button.
When
OPEn
display, the door has opened.
NOTICE
In Privacy Mode, just input correct Owner Code, safe will be open, and press
#
will be close.
ASSIGNING SERVICE CODE
Make sure that the smart safe is open.
Press the
*
,
0
and
#
button, input owner code you set before, and then press
#
button.
When
PrOG
display, press the
*
,
1
and
#
button
When
1St
display, input a 1
st
service code, and then press
#
button
When
2nd
display, input the 1
st
service code and press the # button again
When
dOnE
display, it means 1
st
service code has set successful
When
dOnE
was change into
PrOG
, press the
*
,
2
and
#
button, the display will show
2nd,
input
the 2
nd
service code, and then press
#
button, 2
nd
service code will be confirmed assignment.
NOTICE
Service Code assignment can be continue before display off
DELETE SOME SERVICE CODE
Make sure that the smart safe was open.
Press the
*
,
0
and
#
button, input owner code, and then press
#
button.
When
PrOG
display, press the
*
,
*
,
1
and
#
button
When
dEL1
display, input owner code and press
#
button
