1
2
Application
Select a spa
Home screeen
The main screen gives you access to your accessories, water temperature, water care and settings
�
This screen displays all the hot tubs detected by your application.
To detect your hot tub, you need to connect your mobile device to the
same network to which you connected your Home Transmitter.
Once you have done a connection with the hot tub its name will be saved on
this screen to allow you to connect to this spa from anywhere
�
To add a hot tub
later on, go to p� 2
1 of this
techbook for instructions�
The RF signal strength (communication between the
two in�touch 2
transmitters) is illustrated on the Select a spa screen
� There
are 5 possibile
states:
• Signal superior to 80%
• Signal between 80% and 51%
• Signal between 50% and 31%
• Signal below 30%
• The Spa Transmitter is not available
Reminders menu
Filter Mode menu
Accessories control line
Spa name
Account setting
Indicates current spa water
temperature� Color varies according
to most important active state�
Touch to change set point
Message center that indicates status
of
your spa: heating, filtration, error���
if you click on the message center
you will access the Spa state screen
Settings menu
in.touch 2 - Select your spa
http://bit.ly/2UrwAz7-InTouch2-SelectYourSpa
in.touch 2 "how-to" video
:
Summary of Contents for Hybrid4
Page 4: ...3 Introduction TofC...
Page 17: ...16 Modifying schedules Application TofC...
Page 18: ...17 Application Reminders TofC...
