1
6
Modifying schedules
Application
In this menu it is possible to add, remove or edit schedules of economy or filtration�
To have access to this menu, simply touch the tabs:
Filter Mode menu - the little pen at the right of the wanted filter mode.
*
Note: The default Filter Mode for hot tubs equipped with a Hush pump is "Standard" and is programmed to filter 24
hours (2 x 12hr) per day.
Touch the Economy tab to modify the economy schedules and Filter cycle tab for the filtration schedules�
You can add economy or filtration schedules by touching the « + » symbol�
To delete a schedule, touch the garbage can icon at the right end of the desired line�
You can modify the programmed schedules by selecting one and adjusting the schedule�
You have several possibilities for the schedule (Mon-Fri, weekend, every day, or single days)� The schedules will be
repeated weekly� The time and duration are set in 30 minute increments� Once you have set the schedule, use the
arrow at the top of the page to go back� Ensure that you have selected the desired
Filter Mode in the main Filter Mode
menu�
When an economy schedule is active, the set point will be reduced by 20°F, which means that the heating system will
not be engaged unless the temperature falls to 20°F below the spa's set temperature�
Summary of Contents for Hybrid4
Page 4: ...3 Introduction TofC...
Page 17: ...16 Modifying schedules Application TofC...
Page 18: ...17 Application Reminders TofC...
