Beachcomber Hybrid4, Tech Book

2

WARNING : 

Before installing or connecting the unit, please read the following

�

* FOR OPTIMUM PERFORMANCE PLEASE CAREFULLY READ THE MANUAL BEFORE INSTALLATION

�

* INSTALL THE IN

�

TOUCH 2-CO MODULE AT LEAST 12" (30 CM) AWAY FROM ANY METAL PART OR ANY METAL FOIL

�

* THE IN

�

TOUCH 2-CO MODULE SHOULD BE INSTALLED SUCH AS IT CAN BE RELOCATED UNDER THE SPA IN ORDER

TO OBTAIN OPTIMAL RECEPTION AFTER FINAL INSTALLATION OF THE SPA IN THE YARD

�

* TO SATISFY FCC RF EXPOSURE REQUIREMENTS FOR MOBILE AND BASE STATION TRANSMISSION DEVICES,

A SEPARATION DISTANCE OF 8" (20 CM) OR MORE SHOULD BE MAINTAINED BETWEEN THE IN

�

TOUCH 2

MODULES AND PERSONS DURING OPERATION; TO ENSURE COMPLIANCE, OPERATION AT CLOSER THAN THIS

DISTANCE IS NOT RECOMMENDED

�

* THE ANTENNAS USED FOR THESE MODULES MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH

ANY OTHER ANTENNA OR TRANSMITTER

�

* TO POWER THE IN

�

TOUCH 2-EN, ONLY USE THE POWER SUPPLY UNIT PROVIDED WITH THE IN

�

TOUCH 2-EN

�

* THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL,

SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN

SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR

SAFETY

�

* CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE

�

DISPOSAL OF THE PRODUCT

THE APPLIANCE (OR THE PRODUCT) MUST BE DISPOSED OF SEPARATELY 
IN ACCORDANCE WITH THE LOCAL WASTE DISPOSAL LEGISLATION IN FORCE

�

COMPATIBILITY REQUIREMENTS 

in.touch 2 modules for FCC (North America) models (915 MHz): 

Home and spa transmitter kit: 0608-521020, 0608-521023 

in.touch 2 modules for ETSI (Europe) models (868 MHz): 

Home and spa transmitter kit: 0608-521021, 0608-521024 

Compatible spa packs:

in

�

xm2, in

�

xe, in

�

ye, in

�

yj and in

�

yt spa systems manufactured in or after 2012

�

in.touch 2 application:

Compatible with devices running: 
iOS 8

�

0 or higher

Android 2

�

3 or higher

ROUTER AND INSTALLATION REQUIREMENTS

Any standard router with an available 100 Mbps (wired LAN) RJ45 port can be used

�

 The router must also have its Port 10022 

open, which is normally a default setting

�

 A 3-foot (0

�

9 m) Ethernet cable is included

�

The home transmitter will need a main supply (120V in North America, 220V in Europe) nearby to allow connection of the 
transformer

�

Aeware®, Gecko®, and their respective logos are Registered Trademarks of Gecko Alliance Group

�

in

�

touch 2™, in

�

xm2™, in

�

xe™, in

�

yt™, in

�

ye™, in

�

therm™ and their respective logos are Trademarks of Gecko Alliance Group

�

All other product or company names that may be mentioned in this publication are tradenames, 

trademarks or Registered Trademarks of their respective owners

�

Warning

T of C