Quick Setup Guide
1) Ensure the POWER switch is set to OFF before you begin.
2) Install a fresh alkaline or lithium battery in the adapter.
3) Mount the DXA-SLR PRO adapter to the camera.
4) Connect the supplied output cable from the OUT jack on
the adapter to the MIC input jack on the camera.
5) Connect your microphones or other audio sources to the
adapter XLR inputs
6) Set the GAIN switches to HI.
7) Set the LIMITER switches to ON.
8) Set the MONITOR switch to REC.
9) Set the LIN/MIC/PH switches to:
x
MIC for self powered microphones or wireless
systems
x
PH for microphones that require phantom power
x
LIN for mixers
x
DO NOT activate phantom power when attaching
wireless microphones!
10) Set the 12V/48V switch to 12V to extend the life of the
battery. Set this switch to 48V only if your microphones
require 48 volts to operate properly.
11) Set the M/S switch to M for mono when using one channel
or to S for stereo when using two channels.
12) Set the AGC DSBL switch to the left for off. Before using
this function, please read the information supplied in this
manual for a detailed explanation of how this feature works.
2
