Corporate Headquarters:
BeaconMedæs
PO Box 7064
13325A Carowinds Boulevard
Charlotte, NC 28241
Phone (704) 588-0854
Fax (704) 588-4949
For technical support or to
place an order call:
1 888 4 MEDGAS
(1-888-463-3427)
Fax (866) 635-3296
www.beaconmedaes.com
©2004 BeaconMedæs. All rights reserved.
Part No. 9100-1000-113 Rev. A Pg. 2
Wall Mounted Slide Finish Assembly with Anchors (6803-8030-268)
Wall-mounted slide finish assembly mounts directly to wall and does not utilize a rough-in
assembly for installation.
1.
Use wall-mounted slide finish assembly (A) as a guide and mark two mounting holes
on wall.
Wall Mounted Slide Finish Assembly with Anchors
2.
Drill two 5/16” mounting holes into drywall.
3.
Install two anchors (D) into holes and tighten screws (not shown) supplied with
anchors (D).
4.
Remove and discard screws supplied with anchors (D).
5.
Install two screws (C) (provided) to secure wall-mounted slide finish assembly (A) to
wall.
Corporate Headquarters
BeaconMedaes
1800 Overview Drive
Rock Hill, SC 29730
Phone (803) 817-5600
Fax (803) 817-5750
For technical support or
to place an order call
:
1-800-756-2590
Fax (803) 817-5750
www.beaconmedaes.com
