Page 6-8
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Internet Quick-Start
Chapter 6: General Procedures
4. Enter the
Device Name
in the browser\qs address bar (F) (see figure 6-2 on
page 6–8).
The
Device Name
is printed on the label located on the back of the Master
Alarm Module. The label says:
Serial Number://Master#####
. The ##### rep-
resents the serial number.
This may require installing “Client for Microsoft® Networks” software. Without
the NetBios Name Service enabled, the device must be accessed by its IP
address. To learn the Master Alarm’s IP address, press the
Test Key
.
Figure 6-2. Typical Internet Home Page
The MedPlus TotalAlert® Alarm Network Home page displays (see figure 6-3 on
page 6–9).
Summary of Contents for MedPlus TotalAlert
