Page 6-18
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Setting up the Internet Interface
Chapter 6: General Procedures
This method works on a LAN if your browser has the “Use NetBios Name
Lookup” option enabled, but will not work across routers to the Internet. The
local name is configured in the Setup Device Web page (see figure 6-10 on page
6–18). The
Device Name
, which is the word
Master
plus its serial number,
always works.
Figure 6-10. Setup Device
3. DNS name lookup
Example: http://www.yourfacility.com/master123
This method requires IS personnel to enroll the device into the facility’s DNS
server. The Microsoft® 2000 Server has a dynamic DNS that enrolls devices
automatically if the feature is enabled. If IS personnel allow access though the
facility’s fire-wall, the device can be accessed from the Internet.
Summary of Contents for MedPlus TotalAlert
