GETTING STARTED (BATTERIES)
Thank you for choosing the Beam Universal Remote Control. This remote
control can operate a wide range of electronic devices, works across
most brands and models, and comes pre-programmed to operate
many Samsung TVs (see the
Programming Your Remote
sections if
your device is not compatible). Your remote can control up to 6 devices
and is remarkably easy to set up. To get started, please install four AAA
alkaline batteries (not included) as shown below.
Installing the Batteries
1. Remove the battery cover.
2. Insert the batteries as shown.
3. Snap the battery cover back
into place.
Battery Precautions
• Do not mix old and new batteries.
• Do not mix alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
• Always remove old, weak or worn-
out batteries promptly and recycle
or dispose of them in accordance
with local and national regulations.
Battery Saver
To conserve battery power, the
remote will automatically turn off
if any button is pressed for more
than 60 seconds (except during
programming). This feature is helpful
in the event that the remote is stuck
in a location where the buttons
remain depressed, such as between
sofa cushions.
Battery Cover
Your remote control’s model number
can be found in the battery compartment
Four AAA
alkaline
batteries
(not included)
Model: i580 (PCL-3)
FCC ID: 2AMLDI580
Made in China
02
