RST-100 INSTALLATION AND CONFIGURATION MANUAL
22
Flash Upgrade
Fill in the entry box with the path and filename of the firmware file you wish to load. You can
browse for a file by pressing the “Browse” button.
Note: The file must be located in a writeable location. If you received your file on floppy disc
or CD we recommend you first copy it to a folder on your hard disc.
Note: The computer must be connected directly to the RST in order to program it. If there is
an RST030 or RST035 TrackALERT terminal connected or other peripheral then the
connection will not be established. Connect directly to the Log port of the RST100
When you press the “Re-Program” button the software will launch a special utility called
“Flash Magic” to perform the actual download to the BEAM terminal.
You should see the status message in the main window change to “Waiting for Flash Magic”
and a command prompt window will appear showing the progress of the firmware update
process. The update normally takes about 2 minutes to complete.