RST-100 INSTALLATION AND CONFIGURATION MANUAL
30
SIM/SMSC Settings
Disables PIN lock
This function enables the SIM PIN request to be deactivated. This will then enable the
terminal to register as soon as it is powered up without requesting the PIN be entered.
To
disable
PIN enter the current SIM PIN and then press disable
To
enable
the SIM PIN again enter the requested PIN and then press enable
SMSC (SMS Gateway Number)
The SMSC settings are used by the RST when sending SMS’s. This is not part of
phone number processing. The number is read from and set directly to the SIM card.
Consult your Service Provider for your SMSC number.
To send SMS to email addresses you must use the Iridium SMSC, whereas your
service providers SMSC (e.g. Telstra) may be required for mobile SMS.