RST-100 INSTALLATION AND CONFIGURATION MANUAL
37
Activity Sample Period
Don’t change this unless you know what you are doing. Adjusts the length of sample window
used to determine activity for call termination.
Activity Minimum Count
Don’t change this unless you know what you are doing. Adjusts how many sounds heard in
the activity sample period constitute someone actually talking into the receiver rather than
say a door slamming.
SMS Ding
Optional reminder to the user that an SMS or voicemail is waiting. Sets how often in minutes
the phone will make a very short ring (or ding). Set to 0 to disable this feature.
Line Reversal
To configure Line Reversal for the RST100, firmware loaded must be version 3.3 or higher
and this functionality is only supported on Revision H Boards or greater..
Line Reversal Delay. The default for this feature is "0" which means it is disabled. Setting it
to a non-zero value will enable Line Reversal.
It's range is anywhere from 20msec to 5000msec (5 seconds) after the call is answered.
At this time the line voltage reverses once, and remains so for the rest of the call.