- 2 -
- Do not force the controls.
- If the unit has fallen, always have it checked by a qualified technician before you switch the unit
on again.
- Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry
cloth.
- Keep away from electronic equipment that may cause interference.
- Only use original spares for repairs, otherwise serious damage and/or dangerous radiation
may occur
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads
and cables prior to moving the unit.
- Make sure that the mains lead cannot be damaged when people walk on it. Check the mains
lead before every use for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure
that the mains voltage of the country is suitable for this unit.
This mark attracts the attention of the user to high voltages that are present inside the
housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in
the manual and that he should read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS
. This can damage your eyes. Persons who
are subject to epileptic attacks should be aware of the effects that this light effect may have on
them.
The unit has been
certified CE
. It is prohibited to make
any change
s to the unit. They would
invalidate the CE certificate and their guarantee!
NOTE:
To make sure that the unit will function normally, it must be used in rooms with a temperature
between 5°C/41°F and 35°C/95°F.
