05
Maintenance and maintenance
1. After use, please unplug the power cord from the power outlet.
2. When cleaning the chopping knife, it is recommended to wear gloves for
safety.
3. The parts can be cleaned with detergent and sponge. Do not use hard
steel wire to avoid damage to the surface.
10. After adding food, please check if the chopper is deviated from the
correct position. If the blade does not run fast in a few seconds, please
unplug the plug, level or take out too much food, and then continue to
use it.
11. The blade is very sharp. Please do not touch the blade directly with your
hand. Hold the knife bar on the blade when removing and installing.
12. The continuous working time of this product can not exceed 30 seconds.
After 30 seconds of continuous operation, it must be rested for 2
minutes before use. It should be used for 30 seconds and 2 minutes for
one cycle. It should work continuously for 3 cycles, and must be
separated by 15 minutes.
13. If the power cord is damaged, it must be replaced by a professional from
the manufacturer, its service department, or similar to avoid hazards.
14. The blade of this machine is sharp, and care should be taken when
removing the blade, emptying the mixing bowl and cleaning.
15. If the product stops working during operation, it may be caused by
temperature control of the motor. Please turn off the power and wait for
20 to 30 minutes for cooling.
16. The product should be stored in a place that is unsuitable for children.
Do not use or play this product for people (including children) who are
not physically fit, feel or have problems with their experience or
knowledge.
