11
English
•
Never connect the wireless socket to a power strip or extension box under any
circumstances
•
The range of the remote control can be affected by many factors (e.g. reinforced
concrete or electrical sources of interference). If necessary, remove the source
of interference.
•
Please do not insert any metallic objects into the socket!
• PLEASE NOTE! Not suitable for children under the age of 3 years as the small
parts pose a choking hazard if swallowed!
6. Functions
The BEARWARE outdoor wireless socket set allows you to switch your electronic
devices on and off from a distance using the remote control. This not only saves
time, effort and energy costs, but also reduces the risk of fire due to electronics
parts that are switched on constantly.
7. Setting up
Remove the wireless socket and the remote control from the packaging. The next
step is to configure the individual wireless sockets. A button is provided on the
front of every wireless socket which you can use to activate the programming pro
-
cess.
Press and hold the “Function” button on the wireless socket about 5 seconds, until
the blue LED starts flashing. Then, while the blue LED of the socket is still flashing,
select the desired group (A-D) on the remote control. Assign the desired button
(channels 1-4) via “ON” button on the left. You can change the groups individually
using the slide control in the middle of the remote control.
When you hear a clicking sound twice from the socket, the programming has been
successful. You can also assign several groups (A-D) to the sockets and assign them
freely using the “1, 2, 3 or 4” buttons. The sockets can be switched on (left side
“ON”) or off (right side “OFF”). By using the “G” keys, all sockets can be switched
on or off simultaneously in all groups.
If you want to delete a configuration, press and hold the “Function” button on
the desired socket. The status LED starts flashing blue. Then select the group of
configurations to be deleted on the remote control. Finally, press the button (1-4)
on the “OFF” side to which the outlet is connected in order to confirm the deletion
