8
Beaumont Smart Keybox
> 1. OPENING THE SMART KEYBOX
Enter the code (Manager Code set at the factory = 1-2-3-4-5-6) and
push the “enter/led ”button. If the code is correct, a music sounds,
and the enter/led button wil light up green.
You can now open the Smart Keybox by pulling the cover forward at
the top. After closing the cover the Smart Keybox will lock again.
> 2. CHANGE MANAGER CODE (6 digits)
Press and hold “enter/led” button until three signals have sound. The LED blinks blue.Then enter your
Manager Code. (Manager Code set at the factory = 1-2-3-4-5-6) and push the enter/led button.
1
2
3
4
5
6
Enter a new Manager Code and push the “enter/led” button.
For example:
9
9
7
7
5
5
.......
The LED blinks fast for a short time. Wait for the green LED, the code has now been changed.
> 3. ADDING A NEW USER CODE (6 digits)
Press and hold “enter/led” button until three signals have sound.
General instructions
1
2
3
4
5
6
