5.4 Massage Use
Note
: Do not use any type of cream or oils etc. on your feet or on the massager while
using the massager as this will damage the appliance.
Avoid hair, dust or other foreign matter from accumulating in the counter-rotating heads
and clogging them.
•
Once you have selected your desired settings, gently rest the sole of one foot on top of the
counter-rotating heads.
•
Place your other foot on top of the other counter-rotating head.
•
Move your feet around and back and forward on top of the counter-rotating heads in the
area where you want to be massaged.
•
You can adjust the speed setting during use if required and you can turn the Heat function
on and off as desired.
•
The time recommended for optimum results with the foot massager is approximately 10 to
15 minutes at a time.
•
The appliance has a built in Auto Off function which automatically turns the massager of
after approximately 20 minutes. However, when you have finished your 10 to 15 minute
session, please turn the unit off manually.
Note:
Avoid using the massager before going to sleep or in conditions where you may fall
asleep when using the massager.
6 Completion and Storage
•
After you have finished using the appliance, switch off and unplug.
•
Store the appliance safely in its box and in a dry place.
•
Do Not
wind the power cord around the appliance body as this will damage the cord over
time. Simply loop the cable and place next to the appliance.
7 Cleaning the Appliance
CAUTION: DO NOT IMMERSE IN WATER OR LIQUID.
•
Turn off and unplug appliance prior to cleaning.
•
Do Not immerse the appliance in water, or any other liquid.
•
Clean only with a soft, slightly damp sponge.
•
NEVER allow water or any other liquids to come into contact with the appliance especially
the control buttons, power cord / plug or the counter-rotating heads.
•
Never use abrasive cleaners, solvents, steel wool, scouring pads, brushes, or strong
chemicals that might or might not be flammable and/or damaging to the product to clean.
Page 8 of 10
