BeaverPad BP-100
User Manual
10
|
P a g e
There is no need to turn on the stylus pen as it always stays on.
To begin writing, bring the tip of the pen close to the screen.
This will cause the indicator light to turn from green to a brighter green
– indicating
successful detection of the sensors located in the stylus pen by the Pad and every
stroke you take using the pen will now be recorded. You may now proceed with your
writing or drawing.
The BP-1000 has a pressure sensitive flexible screen that uses a multi-pressure forced
induction writing technology. This means the thickness of the lines drawn would be
directly responsive to the pressure applied by the stylus pen.
3.2.2 Writing without power
You may write on the tablet without having the tablet or the pen powered on. However, if you
write without power,
you won’t be able to save your work inside the tablet’s memory, or use any
other features such as Bluetooth or USB connectivity.
3.3 Erase
3.3.1 Erasing
If you are not satisfied with something you have written on the screen, you may erase the page
and start over by clicking the 'back' button twice. This will give you a new blank page.
3.3.2 Erase Lock Mode
To avoid accidental erase, use the key on the right side of the tablet to switch it to ‘Locked
Mode’. This will prevent you from erasing anything that’s on the screen even if you press the
‘Erase’ button. To turn off the ‘Locked Mode’, simply switch the key back to ‘Unlocked mode’,
and you will again be able to erase the screen by pressing the erase button twice.
