About Your Duck Boat
Material
Your Stealth 2000 is made from 100% high-density and UV resistant polyethylene plastic.
Polyethylene is many times more impact resistant than fiberglass. It will remain colorfast and
durable through many years of exposure to the elements and throughout wide ranges of temperature
fluctuation.
Polyethylene is very abrasion resistant but not abrasion proof. Some care in handling and operating
Your duck boat is necessary to ensure its long life. Clean the hull and deck with common household
Detergents, hot water, and a scrub brush.
Capacity
The capacity of your boat, in both passengers and added cargo, is determined by the boat’s size and
Each boat has a capacity tag clearly displayed on the craft.
Drain Plugs
Just like any boat, your boat may take on some water. Because of its flexible nature, a polyethylene
boat is prone to accumulate a small amount of water between the deck and hull. Water may accumulate
between the deck and hull due to rain, waves, and condensation. This is normal, not a defect, and should
be drained after each use.. A drain plug is located on the molded handle of your Stealth duck boat..
Remove the plug and life the bow of the boat so all the water drains to the transom. Please be sure to
Secure the drain plug after draining. Remove battery before draining your boat.
Setting Up Your Fishing Boat
Components and Basic Set-Up
Please follow the recommended steps to prepare your boat:
4
