10
11
Assembly Instructions - Cot Mode
Assemble dropside panel
Please note: The assembly of the dropside panel requires the assistance of two people.
1. Loosen fixed side panel and mattress base bolts before beginning.
2. Lay the cot on it’s side.
3. Using the dropside panel (5), angle it at the side of
the cot at an approximate 30 degree angle.
It is imperitive to keep the dropside level when
inserting it, otherside it will cause damage to the
cot.
3. Ensure the plastic ring in figure 1. lines
up with the bottom opening in figure 2.
Ensure the plastic ring
is guided into the wide
opening.
Locate the plastic ring to be
guided into the opening.
2.
1.
Assembly Instructions - Cot Mode
4
5
5
Attaching mattress base
1. Attach each side of the mattress base (7) to one end panel using two 45mm (C) cot assembly
bolts. Secure with allen key. Do not tighten bolts completely.
2. Repeat for other end of mattress base.
3. Tighten all bolts securely.
I
WARNING: Do not over-tighten bolts.
