12
13
To raise and lower drop-side panel
1. To lower drop-side panel; lift the drop-side panel in the centre of and push lower rail inwards with your leg, allowing it
to drop into place.
2. To lift drop-side panel; simply hold and lift from the centre of top rail.
WARNING: Do not over-tighten bolts.
PLEASE NOTE:
To ensure the drop-side mechanism functions properly please ensure that the contour top rail of the drop-side
panel is in the upper most position as shown.
Please ensure that the fixed side panel also has the contour top rail of the fixed side panel in the upper most position.
D
E
F
Assembly Instructions - Cot Mode
Assembly Instructions - Cot Mode
5. Once the top of the dropside panel is in place and lined up with the
slot, slowly guide the panel downward whilst simultaneously prying
the legs of the cot slightly outward. This will enable the metal guide
pin (F) to drop into the track.
6. Ensure the bolts of the fixed side panel and the mattress are
tightened before use.
F
WARNING: Do not over-tighten bolts.
