background image

16

17

1.1 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a 

replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You 

are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not 

amount to a major failure.

1.2 In addition to the guarantees that cannot be excluded under the Australian Consumer Law described in clause 1.1 and 

any other guarantee or warranty implied by law, when you purchase one of our products, you will also have the peace 

of mind in knowing that your product is covered by CNP Brands Standard Warranty. The Standard Warranty is provided 

by C.O. White Pty Ltd trading as CNP Brands (ABN 97 004 169 233) (“CNP Brands”). The terms and conditions of the 

Standard Warranty are further described below. 

1.3 Subject to clause 1.1 and the terms below, CNP Brands warrants that this CNP Brand product, purchased by you in 

Australia or New Zealand:

a) Is free from defects in workmanship and material, when the product is used for normal consumer use for a period of 2 

years from the date of purchase as evidenced by your proof of purchase (“Warranty Term”); and

b) Will, when the product is used for normal consumer use, comply with the manufacturer’s specifications during the 

Warranty Term.

1.4 CNP Brands agrees to repair or replace at CNP Brands cost, the product, and any accessory supplied with the 

product, which is proven upon inspection by CNP Brands or a CNP Brands Authorised Service Agent not to comply with 

either warranty contained in clause 1.3. Any decision to repair or replace a product is to be made by CNP in its 

absolute discretion. The extent of any repair will be to rectify any defect in workmanship and materials or to ensure that 

the product complies with the manufacturer’s specifications.

1.5 To make a claim under this Standard Warranty you will need to:

a) Return the product within the Warranty Term to the place of purchase together with your proof of purchase, where the 

retailer will provide you with assistance to make your claim; or

b) Contact CNP Brands Customer Care Centre on toll free 1300 667 137 during the Warranty Term to register your 

claim and provide the details to enable CNP Brands to assess the claim.

1.6 You may also be required to make the product available to CNP Brands or a CNP Brands Authorised Service Agent. If 

you are required to return the product to a CNP Brands Authorised Service Agent, CNP Brands will provide details of the 

centre closest to you. Unless CNP Brands decides otherwise you are responsible for any costs associated with returning 

the product to CNP Brands. The product will be at your risk whilst in transit to and from the CNP Brands or CNP Brands 

Authorised Service Agent, unless transported by CNP Brands or its agents.

1.7 In order for your claim to be processed you will need to provide to CNP Brands with an original proof of purchase. For 

example an original retailer purchase receipt, bill of sale, invoice, lay-by docket, credit card receipt or similar proof of 

purchase.

1.8 If CNP Brands decide to repair a product, this product may be replaced by refurbished products of the same type 

rather than being repaired. Refurbished parts may be used to repair the product. Replacement of the product or a part 

does not extend or restart the Warranty Term.

1.9 Exclusions 

a) This Standard Warranty does not cover products purchased as an ex-display, without being checked by CNP Brands 

or CNP Brands Authorised Service Agents.

b) This Standard Warranty does not cover faults or defects caused by:

i.  Unsuitable, improper use or use not in accordance with the manufactures specifications;

ii.  Incorrect installation or installation not in accordance with instructions provided;

iii.  Normal wear and tear;

iv.  Inadequate or complete lack of maintenance;

v.  Chemical, electrochemical or electrical influences; or 

vi.  Harsh detergents or abrasive cleaners used on product finishes.

c) To the fullest extent permitted by law, CNP Brands excludes all liability for damage or injury to any person, damage to 

any property, and any indirect consequential or other loss or damage. 

 

For Customer Service in Australia, contact CNP Brands on 1300 667 137 or email info@cnpbrands.com.au. In New 

Zealand contact Wainhouse Distribution on 0800 567 5000 or email helpline@wainhousedist.co.nz.

Warranty Terms and Conditions

Assembly Instructions - Sofa Seat Mode

Removing drop-side panel 

Assuming that the cot is assembled in cot mode with mattress base in the lower position: 

1.  Loosen (but do not remove) the 45mm bolts (C) in all four corners of the mattress base.
2.  Remove the drop-side panel from the end panels by carefully detaching the drop-side guiding pins (D,E,F) from the drop-

side track. 

3.  Remove four drop-side guiding pins to avoid a potential protrusion hazard and insert four 15mm bolts (G) to avoid 

potential finger entrapment hazard.

4.  Tighten all bolts on mattress base. 

5.  Sofa seat is now ready for use. 

WARNING: Do not over-tighten bolts.

How to care for your bebe care cot

Cleaning 

To ensure the long-lasting use of your cot, wipe down with a damp cloth and use a mild soap solution if necessary. Do not 

use abrasive cleaners. Always store product in a clean dry place.

Maintenance 

Check cot regularly to ensure that locking devices and components are secure and working properly. Always check parts 

regularly for tightness of screws, nuts and other fasteners – tighten or replace if required. To maintain the safety of your cot, 

seek prompt repairs for bent, torn, worn or broken parts. Use only those parts and accessories approved by CNP Brands. 

If you have any difficulties in assembling the cot, please contact our Service Department. 

Distributed in Australia by CNP Brands, 20 Calarco Drive, VIC, 3030

Customer Service: 1300 667 137 

W: www.cnpbrands.com.au

            

 E: info@cnpbrands.com.au

Distributed in New Zealand by Wainhouse Distribution, 2-6 Argyle St, 

Morningside, PO Box 41-014, St Lukes, Auckland, New Zealand

Customer Service: 0800 567 5000 

helpline@wainhousedist.co.nz

Summary of Contents for 091234











Reviews: