BEBE CONFORT 8007057210, Manual

24

I

 Tinca base 

I

 Bébé Confort

SAFETY

The car seat base is developed for an intensive 

use of approximately 6 years.

Tinca base car use 

• Unfold the support leg (C) and place the base 

on the vehicle seat. Pull the ISOFIX connectors 

(G) outwards by simultaneously pulling the lever 

for ISOFIX connector length adjustment (H).

• Connect the ISOFIX connectors (G) with 

the ISOFIX anchorage points in the back of 

the vehicle seat. An audible ‘CLICK’ confirms 

the connection is secure. Now push the base 

towards the backrest of the vehicle seat as far 

as possible.

• Place the support leg (C) in the most forward 

position. Press the support leg adjuster button 

(D) and adjust to the correct length by pulling the 

lower part of the support leg down. Make sure 

the support leg is stable and firmly positioned 

on the vehicle floor. The indicator (B) on the 

side of the support leg turns green when the 

installation is secure.

WARNING:

Install the car seat base only on a forward facing 

vehicle seat.

Installing Tinca car seat 

• Connect the mounting bars onto the base until 

they lock onto the base by means of an audible 

’CLICK’. Make sure the indicator located on the 

car seat release button (A) has turned green.

• To release Tinca from the Tinca base, first 

press the car seat release button (A) and then 

pull it towards the front of the base. Remove 

Tinca from the base. 

WARNING:

• Never install Tinca in forward facing position 

onto the Tinca base in the car.

• Do not install the Tinca base with Tinca on it in 

the area of airbag deployment.

• The safety of your child for not complying with 

the installation and instruction manual is not 

guaranteed.

CARE

The base can be cleaned using a wet cloth.

A - Car seat release button with indicator for  

    correct installation 

B - Support leg indicator for correct installation  

   (L+R)

C  - Support leg

D - Adjuster button for support leg

E  - Storage compartment for user manual

F  - ISOFIX release buttons with indicator for  

    correct installation (L+R)

G - ISOFIX connectors (L+R)

H - Lever for ISOFIX connector length  

   adjustment

I  - Anchor points for securing seat

EN