background image

 
WARNING

! PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR SLIDING OUT. 

 

WARNING

! ALWAYS SECURE CHILD IN THE RESTRAINT. ALWAYS KEEP YOUR CHILD IN VIEW. 

 
WARNING

! FOR  YOUR  CHILD’S  SAFETY,  FOLLOW  ALL  LABELS ON  THIS  PRODUCT  AND  IN  THESE  

WRITTEN INSTRUCTIONS.  DO  NOT  INSTALL  OR  USE  THIS PRODUCT UNTIL YOU READ AND 
UNDERSTAND THE WARNINGS AND ASSEMBLY INSTRUCTIONS. FAILURE TO FOLLOW THESE 
WARNINGS AND THE ASSEMBLY INSTRUCTIONS  COULD  RESULT  IN  SERIOUS  INJURY OR DEATH. 
 

WARNING

! NEVER LEAVE A CHILD UNATTENDED. 

 
WARNING

! This product is designed to be used by a child who can sit upright unaided, up to 

MAXIMUM weight of 18.1 kg. 
KEEP THESE INSTRUCTIONS FOR FUTURE USE. 
READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND USE. 
THE CHILD SHOULD BE SECURED IN THE HIGH CHAIR AT ALL TIMES BY THE RESTRAINING SYSTEM. 
THE TRAY IS NOT DESIGNED TO HOLD THE CHILD IN THE CHAIR. 

 
WARNING

! Remove all packaging and discard. Lay out all parts as per the Parts List to facilitate 

assembly. 
 
If you experience any difficulties, please contact the Customer Service Department at  

info@bebestyle.co.uk

 

 
REMOVE PACKING MATERIALS AND POLYBAGS, AND DISPOSE OF THEM BEFORE ASSEMBLY.  
PLASTIC BAGS CAN CAUSE SUFFOCATION.  KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM 
CHILDREN. ADULT ASSEMBLY REQUIRED. FOLLOW ASSEMBLY INSTRUCTIONS CAREFULLY.  
 
DO NOT use this product without properly assembling it.  Keep unassembled parts out of the reach 
of small children. 
 
!  

CHOKING HAZARD

- Small parts: Ensure children do not play with unassembled product, as there 

are small parts that could cause choking if swallowed. 

 
WARNING! ! 

THE CHILD SHOULD BE SECURED IN THE HIGH CHAIR AT  ALL  TIMES  BY  THE  

RESTRAINING  SYSTEM.  THE TRAY IS NOT DESIGNED TO HOLD THE CHILD IN THE CHAIR.

 

!  Snugly adjust harness belt around child. 
!  NEVER carry or move the high chair with child in it. 
!  DO NOT place high chair near walls or furniture that the child can push against and tip over. 
!   When adjusting any part of this product, the child should be clear of all moving parts. 
!  Be sure both sides of tray are firmly in place. 
 

STRANGULATION HAZARD

:  

Summary of Contents for PSDH72










Reviews: