Device Configuration /
Advanced Setup
73
BEC 9800VN User Manual
DMZ
NOTE: This feature disables automatically if WAN connection is in BRIDGE mode.
The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP
address as the DMZ Host, all incoming packets will be checked by the Firewall and NAT algorithms
then passed to the DMZ host, when a packet received does not use a port number used by any other
Virtual Server entries.
DMZ for:
Indicate the related WAN interface which allows outside network to connect in and
communicate.
Note:
Here you can see the Multiple IPs Account/EWAN Service ID 0. It is the interface
set in the previous NAT page.
DMZ:
Enabled:
It activates your DMZ function.
Disabled:
It disables the DMZ function.
DMZ Host IP Address:
Give a static IP address to the DMZ Host when
Enabled
radio button is
checked. Be aware that this IP will be exposed to the WAN/Internet.
Select the
Save
button to apply your changes.
