background image

Email: sales01@szbecen.com.cn

1.General Instructions:

Please carefully read and understand the instructions in this manual thoroughly before
attempting to operate this unit. These instructions contain important safety
information regarding the use and mainte nance of this unit. Please keep this manual
with the unit, for future reference.

2.Main Features:

LEDs :

36pcs*5IN1 LED(15W)

Voltage :

100-240v/50-60Hz

Working Position:

Any safe,secure position

Warranty:

1 year

3.Safety Precautions:

*To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture
*Do not spill water or other liquid into or on to your unit.
*Be sure that the local power outlet match that of the required volt- age for your unit.
*Do not attempt to operate this unit if the power cord has been frayed or broken.
*Do not attempt to remove or break off the ground prong from the electrical cord.
This prong is used to reduce the risk of electrical shock and ire in case of an internal
short.
*Disconnect from main power before making any type of connection.
*Do not remove the cover under any conditions. There are no user serviceable parts
inside.
*Never operate this unit when it

s cover is removed.

*Never plug this unit in to a dimmer pack
*Always be sure to mount this unit in an area that will allow proper ventilation. Allow
about 6(15cm) between this device and a wall.
*Do not attempt to operate this unit, if it becomes damaged.
*This unit is intended for indoor use only, use of this product out doors voids all
warranties.
*During long periods of non-use, disconnect the unit

s main power.

Summary of Contents for BC-278A






Reviews: