fr
en
de
nl
29
Warning!
• Risk of injury through an electric shock.
• Terminal connections to a 230 V network must be carried out by an
authorised electrician.
• Before assembly, disconnect the power lead from the supply.
• The provisions of the local public utilities and stipulations for wet and
damp rooms in accordance with VDE 100 are to be observed when
the system is connected.
• Use in dry rooms only.
• Use only unmodified Becker original parts.
• Keep persons away from the systems guide track.
• Keep away from controls.
• Please comply with national stipulations.
• Dispose of used batteries properly.
Replace batteries with an identical type (CR 2032) only.
• If the system is controlled by one or several devices, the system
guide track must be visible during operation.
• Only types of cable with sufficient electric strength can be used for
connecting control cables (protective low voltages).
• The equipment contains small parts that could be swallowed.
Safety Information
The SWC52 control device may be used to operate sun protection systems
only.
This device may only be used in connection with equipment from other manu-
facturers following consultation with your local retailer.
Intended use
Summary of Contents for Centronic SunWindSet SWS42
