50
Assembly and Operating Instructions
What to do if...?
Problem
Cause
Remedy
Drive is not function-
ing.
1. Batteries are dead.
2. Batteries are incor-
rectly inserted.
3. Receiver outside the
radio range.
4. Transmitter is not
programmed in the
receiver.
1. Insert new batteries.
2. Insert batteries cor-
rectly.
3. Reduce distance to the
receiver.
4. Programme transmitter.
The word BATTERY is
displayed.
Battery power is low.
Replace batteries.
The required drive is not
functioning.
Incorrect channel se-
lected.
Correct channel selected.
Astro programme does
not function according
to the switching times.
1. Date is incorrect.
2. Wrong city or wrong
latitude/longitude set.
3. Holiday function is
switched on.
4. Astro shift is set.
1. Set correct date.
2. Set correct city or
exact degrees latitude/
longitude.
3. Switch holiday function
off.
4. Adjust astro shift.
The TC445-II does not
execute the pre-set
switching commands.
The sliding switch is set
to manual operating
mode.
Adjust the sliding switch
to automatic operating
mode.
The TC445-II executes
the pre-set switching
commands incorrectly.
The HOLIDAY function is
activated.
Deactivate HOLIDAY
function.
Roller shutter does not
move to the end limit.
No end limit position is
set.
Set the end limit position
using the PROG END
LIMIT option in the set-
tings menu.
The transmitter does
not react after the
batteries have been
changed.
Power supply has been
interrupted for too long.
Press the RESET button.
Check settings.
Summary of Contents for Centronic TimeControl TC4410
Page 27: ...fr en de nl 27...
Page 51: ...fr en de nl 51...
Page 99: ...fr en de nl 99...
Page 100: ...4034 630 206 0b 11 11 310316 02...
