54
Operating Instructions
SETTING
INTERMEDIATE POSITION, VENTILATION/REVERSE, Prog1 END LIMIT
(Time/ position programming)
1. You have confi rmed the HOLIDAY/LIGHT SENSOR menu levels. INTERMEDI-
ATE POSITION will appear.
2. You can set the switching time to move to the INTERMEDIATE POSITION using the
+/-
button. The switching time is indicated in a few seconds or you can move
to the INTERMEDIATE POSITION from the upper end limit using the DOWN/
UP button.
3. Confi rm by pressing
OK
.
4. You can set the switching time to move to VENTILATION/REVERSE using the
+/-
button. The switching time is indicated in a few seconds or you can move
to the VENTILATION/REVERSE from the lower end limit using the UP/DOWN
button. Confi rm by pressing
OK
.
5. You have confi rmed the VENTILATION/REVERSE menu level. PROG1 END
LIMIT / PROG 1 INTERMEDIATE POSITION or PROG 1 VENTILATION/RE-
VERSE will appear.
6. You can select PROG 1END LIMIT, PROG 1INTERMEDIATE POSITION and
PROG 1VENTILATION/REVERSE using the
+/-
button.
7. Confi rm your selection by pressing
OK
.
8. The function PROG1 END LIMIT has now been set.
9.
Please read on for further programming options using the SETTING
menu.
Summary of Contents for Centronic TimeControl TC511A
