Activating Bluetooth
®
Tubular drives with the letters “BT” added to their product names have an integrated Bluetooth
®
interface.
Both limit positions must be set before Bluetooth
®
is activated.
The operator unit must have at least Bluetooth
®
version 4.0. You can find this information
in the operating instructions for the operator unit.
Download the Becker Service app from Google Play Store or the App-Store, and install it on the operator unit.
Activating Bluetooth
®
on the tubular drive
Activate Bluetooth
®
on your operator unit.
> 10s
Disconnect the tubular drive from the power supply for > 10 seconds.
Open the shading solution to the upper limit position.
1s to 3s
Now move the shading solution out of the upper limit position for a minimum of
1 second and a maximum of 3 seconds.
Then move back to the upper limit position and maintain the supply of power to the
tubular drive.
The tubular drive will now be visible on the operator unit for 3 minutes.
Now select the required tubular drive from the list in the Bluetooth
®
menu on your operator unit, and click on OK.
To set up the connection, you will now need to enter the PIN code 123456.
Selecting the driving profile
The limit positions must be set. The switching commands sequence must be carried out in
quick succession. Each completed sequence sets the consecutive driving profile.
The equipment is set to default on delivery. The set driving profile is run after setting of limit positions is complete.
Carry out the following sequence without interruption between the individual drive commands:
1 s
1 s
1 s
1 s
1 s
hold until
Driving profile
Description
1. Standard operation
The tubular drive starts at a reduced output speed and accelerates during operation.
The output speed is reduced again shortly before the limit position.
2. Silent operation
The tubular drive runs at a substantially reduced output speed to ensure a reduced
noise level.
3. Dynamic operation
The tubular drive runs at its output speed during the entire operation.
16 - en
Summary of Contents for enocean R8-17
Page 23: ...Declaration of conformity 23 en ...
Page 24: ...Declaration of conformity 24 en ...
Page 28: ......