Page 3-6
DV 16800.03 Issue 1 12/11
GK615-X
3.2.2 Operation Modes
The transceiver will always work in one of the four operation modes:
- Standard mode
- Direct tune mode
- Channel mode
- Scan mode
The first three modes (standard mode, direct tune mode, channel mode) are called frequency selection
modes and providing different user interface for convenient selection of the operating frequency.
The three frequency selection modes can be toggled by consecutive short pressing of “MDE”. They will
be toggled in the following order: standard mode, direct tune mode, channel mode, standard mode,
etc.
The forth mode is a special mode called SCAN-Mode for monitoring two frequencies at the same time.
SCAN Mode can be entered and left by long press of “
/SCN” key.
3.2.2.1 Standard Mode
Standard mode can be entered by consecutive short pressing of “MDE”.
Standard mode will be leaved by selecting another operation mode.
In standard mode the display will indicate the active frequency in the top line and preset frequency in
the bottom line.
The active frequency can not be edited directly (like in direct tune mode). But the preset frequency can
be changed and set by consecutive turning and pushing the ”Rotary encoder”.
A short press of the “
/SCN” key exchanges the active and preset frequency. Exchange is disabled
while the transceiver is in transmit operation.
3.2.2.2 Direct Tune Mode
Direct tune mode can be entered by consecutive short pressing of “MDE”.
Direct tune mode will be leaved by selecting another operation mode.
Summary of Contents for GK615-X
Page 12: ...Page 2 II DV 16800 03 Issue 1 12 11 GK615 X Blank...
Page 16: ...Page 2 4 DV 16800 03 lssue 1 12 11 GK615 X Fig 2 4 Dimensions of portable VHF Station GK615 X...
Page 18: ...Page 2 6 DV 16800 03 lssue 1 12 11 GK615 X Fig 2 6 Car mounting bracket and handle GK615 X...
Page 20: ...Page 3 II DV 16800 03 Issue 1 12 11 GK615 X Blank...